10
English
Assigning the game pieces
1. Slide the barrier onto the base unit so that it is positioned between the
horizontal grids.
2. Assign the 10 plastic ships (5 to each player), the torpedoes, the radars and the
mega-bombs (1 to each player).
Aircraft carrier (5-dots ship) = 1 per player.
Nuclear submarine (4-dots ship) = 1 per player.
Stealth battle ship (3-dots ship) = 2 per player.
Navy seals dinghy (2-dots ship) = 1 per player.
Torpedo = 1 per player.
Radar= 1 per player.
Mega-Bombe = 1 per player.
3. Split the 200 white pegs, the 60 red pegs and the 10 flags between the
2 players, and store them in the corresponding storage compartments.
Your goal is to discover all the locations of your enemy’s ships and sink them
before he can destroy yours. The game is played on 4 grids, two for each player.
On the lower grid, you arrange your ships and record the shots by the opponent.
On the upper grid, you record your shots on the enemy’s ships.
Game objective
Getting started
1. Barrier / target grid / sunken ships indicators
2. Player fleet grid with coordinates
3. “Target hit / Target destroyed” button
4. OFF/Lo (low volume)/Hi (high volume) selector switch
5. “Fire/special weapons” button
6. “Target missed” button
Note: the buttons are the same for both players, except for the OFF/Lo/Hi button
located on one side of the board only.
Product description
To Next Page
Loading...
Need help?
General
