1
3
2
Toggles the unit between on and standby. When the unit is on, pressing this
button places the unit into standby and lights the red LED on the front panel
standby button. When the unit is in standby, pressing this button activates all
zones that were active in the previous operating session.
Activates the remote control backlight, making buttons more visible in the dark.
The backlight also activates whenever any button is pressed, and deactivates
automatically.
Accesses a bank of commands that control the Main Zone.
Accesses a bank of commands that control Zone 2 and the Main Zone.
Accesses a bank of commands that control the Record and Main Zones.
Accesses a bank of commands that control the Main Zone.
1
2
3