CUSTOM SETUP
FRONT L/R 40Hz
CENTER 60Hz
SIDE L/R 60Hz
REAR L/R 60Hz
SUB L/R MONO
SUB XOVER 40Hz
LFE OFF
3-20
The SETUP Menu
Lexicon
CUSTOM SETUP (continued)
FRONT L/R (FULL, 30Hz to 120Hz, THX 80Hz)
The FRONT L/R parameter sets the crossover setting for the MAIN
AUDIO OUTPUTS labelled FRONT L/R. When set to FULL, the unit
sends a full-range audio signal to the FRONT L/R outputs. When set
to a numerical crossover setting, the unit activates a crossover at
the selected frequency. Choose the setting closest to the low-
frequency rating of the front left and right speakers. See pages
3-18 and 3-19 for more information about crossover settings.
CENTER (FULL, 30Hz to 120Hz, THX 80Hz, NONE)
The CENTER parameter sets the crossover setting for the MAIN
AUDIO OUTPUT labelled CENTER. When set to FULL, the unit sends
a full-range audio signal to the CENTER output. When set to a
numerical crossover setting, the unit activates a crossover at the
selected frequency. Choose the setting closest to the low-
frequency rating of the center speaker. See pages 3-18 and 3-19 for
more information about crossover settings. When set to NONE, the
unit redirects center channel signals to the FRONT L/R outputs.
SETUP
SPEAKERS CUSTOM SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
FRONT L/R SPEAKERS
FULL
30Hz
40Hz
50Hz
60Hz
70Hz
80Hz
THX 80Hz
90Hz
100Hz
110Hz
120Hz
SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
To Next Page
Loading...
Need help?
General
