3-28
The SETUP Menu
Lexicon
LEVELS CALIBRATION (continued)
SUB LIMITERS
Dolby Digital and dts(-ES) input types can produce low-frequency
peaks at much higher levels than 2-channel input types. In home
listening spaces, the subwoofer and its associated amplifier are
sometimes unable to reproduce these levels without
overloading. For this reason, the unit is equipped with internal sub
limiters that help prevent subwoofer signals from exceeding a
designated value. This parameter can be adjusted within a 75 to
115dB range. Separate limiters are provided for the SUBWOOFER
L/R and the LFE outputs.
Default
Parameter Value Values
CAL NOISE ON ON, OFF
L/R LIMITER ON ON, OFF
L/R LIMIT ADJ 100dB 75 to 115dB
LFE LIMITER ON ON, OFF
LFE LIMIT ADJ 100dB 75 to 115dB
Note:
In cases where the left and right subwoofers have
built-in limiter protection, the L/R LIMITER parameter
should be set to OFF. In cases where the LFE sub-
woofer has built-in limiter protection, the LFE LIMITER
parameter should be set to OFF.
LEVELS CALIBRATION
INTERNAL NOISE TEST
EXTERNAL NOISE TEST
SUB LIMITERS
SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
SUB LIMITERS
CAL NOISE ON
L/R LIMITER ON
L/R LIMIT ADJ 100dB
LFE LIMITER ON
LFE LIMIT ADJ 100dB
!CAUTION!
HIGH AUDIO LEVELS
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
To Next Page
Loading...
Need help?
General
