Lexicon MC-8 Software Upgrade Instructions

Introduction Lexicon
iv
DOCUMENTATION CONVENTIONS
This document contains hardware and software installation instructions for the MC-8 Digital Controllers. Refer to the MC-8 User Guide for
general safety, installation, and operation instructions.
The following symbols are used in the document:
Appears on the component to indicate the
presence of uninsulated, dangerous voltage inside
the enclosu
re, voltage that may be sufficient to
constitute a risk of shock.
Appears on the component to indicate important
operating and maintenance instructions in the
accompanying documentation.
Calls attention to a procedure, practice, condition,
or the like that, if not correctly performed or
adhered to, could result in damage to circuit
boards from electrostatic discharge or improper
insertion.
Calls attention to a procedure, practice, condition
or the like that, if not correctly performed or
adhered to, could result in injury or death.
Calls attention to a procedure, practice, condition
or the like that, if not correctly performed or
adhered to, could result in damage or destruction
to part or all of the unit.
Calls attention to information that is essential to
highlight.
WARNING
CAUTION!
Note:

Lexicon MC-8 Specifications

General

Brand	Lexicon
Model	MC-8
Category	Controller
Language	English