Lexicon
3-1
Chapter 3 Specifications
Analog Inputs (2)
Connectors: 1/4" unbalanced
Impedance: 500K unbalanced for Direct Instrument input (unit detects a mono input on the right
input)
A/D Dynamic Range: >95dB typical, 20Hz-20kHz, unweighted
Levels: -30dBu to +4dBu
Resolution: 24-Bit
Analog Outputs (2)
Connectors: 1/4" unbalanced
Impedance: 75 Ohms for Headphone output (Right only used for mono output; Left only used for
stereo headphones)
D/A Dynamic Range: >100dB typical, 20Hz-20kHz, unweighted
Levels : +8dBu typical
Resolution: 24-Bit
Frequency Response: Wet/Dry 20Hz-20kHz, ±1dB
Crosstalk: >45dB
THD: <0.05%, 20Hz-20kHz
Digital Audio Interface
Output Connectors: Coaxial, RCA type; 24-bit Digital S/PDIF (always active)
Sample Rates: 44.1kHz
Internal Audio Data Path: DSP: 24-bit
Footswitch: Tip/Ring/Sleeve phone jack for Bypass and Tap (optional)
System Specifications
Power Requirements: 9VAC wall transformer provided in North America and Europe
No-transformer option available
Environment
Operating Temperature: 32° to 104° (0° to 40°C)
Relative Humidity: 95% non-condensing
Dimensions: 19"W x 1.75"H x 4" D (483x45x102mm)
Weight: Unit: 2lbs, 2 ounces (0.959kg)
To Next Page
Loading...
