MV-5 PC & Dock Controls
5-7
ZONE 2 iPOD CONTROLS
The MV-5 Processor allows the DOCK input, and attached iPod, to
be accessed and output to either the Main Zone or the Zone 2
location. However, for the DOCK inputs, the OSD and front panel
display reflect ONLY the Main Zone activity. Therefore, if the iPod is
accessed in Zone 2, there is no visible indication on the MV-5 that a
change has been made.
To control the iPod in Zone 2 via the remote control:
1. From the “Zone 2” menu layer, select the DOCK input (num-
ber pad key 8).
2. Page 1 of the “Zone 2” menu layer touch screen provides the
iPod controls.
To Next Page
Loading...
