Lexicon MX200 - Page 11

DDiiaaggrraamm -- FFrroonntt PPaanneell
14. Effect Select - P1
This button selects the reverb, delay, or
effect to be loaded in Processor 1.
15. Pre Delay Knob - P1
Controls Pre Delay of the reverbs or the
first parameter of the selected delay or
effect in Processor 1.*
16. Decay Knob - P1
Controls Decay of the reverbs or the sec-
ond parameter of the selected delay or
effect in Processor 1.*
17. Variation - P1
Controls Liveliness or Diffusion (depending
on the reverb selected) or the third param-
eter of the selected effect in Processor 1.*
18. Effect Select - P2
Same as for Processor 1 (see #14).
19. Pre Delay Knob - P2
Same as for Processor 1 (see #15).
20. Decay Knob - P2
Same as for Processor 1 (see #16).
21. Variation - P2
Same as for Processor 1 (see #17).
22. Program Display
2-character LED display indicates which of
the 99 Factory or User programs is loaded.
A small dot appears at the bottom right of
the Program Display window, indicating
that the displayed program is a User pro-
gram. Also shows Utility settings and
parameter values during editing.
23. Program Select Knob
Navigates through Factory and User pro-
grams, as well as Utility functions.
5
*
Refer to the Effects Descriptions section
for more information about parameters.