TThhee MMXX--EEddiitt EEddiittoorr//LLiibbrraarriiaann -- WWiinnddoowwss
your previous programs and settings.
To archive the MX200, click
Device and
select
Backup. A warning will appear,
advising you that a full Backup may take a
few minutes, and asking whether you wish
to proceed. To cancel without creating a
Backup archive, click
Cancel or close the
dialog box. To proceed, click
OK. A
progress bar appears at the bottom of the
MX-Edit screen, indicating that a Bulk
Dump is in process. When all the MX200
data is received, a
Save dialog box
appears. The default file name is the cur-
rent day and date (e.g. Backup
Wednesday, April 27, 2005
) with the file
extension .m2a (MX200 Archive file). Click
Save to store the Backup Archive file.
To restore a saved archive, click
Device
and select Restore. When prompted,
select an MX200 archive file, and click
Open. MX-Edit then sends the MX200
archive to your MX200, replacing all the
data in the hardware with the archived
data.
Note: It is a good idea to create a new
Backup archive file anytime you plan to
restore the MX200 from a previous archive
session.
31
To Next Page
Loading...
