Lexicon MX400 - Important Safety Instructions; Electrical Hazard Warnings; Power Cord and Grounding

MX400 Dual Stereo/Surround Reverb Processor
Analog Audio Inputs
Connectors four ¼" TRS balanced or unbalanced
Impedance 50k Ohms bal., 25k Ohms unbal.
Input Level +4 dBu nominal, +24 dBu maximum
48kHz or 44.1kHz
A/D Conversion 24-bit, 48kHz 128 x oversampling
Analog Audio Outputs
Connectors four ¼" TRS balanced or unbalanced
Impedance 2k Ohms bal., 1k Ohms unbal.
Output Level +4 dBu or –10 dBV nominal
(software adjustable), 24 dBu maximum
48kHz or 44.1kHz
D/A Conversion 24-bit, 48kHz 128 x oversampling
Analog Audio Performance
Frequency Response 10 Hz – 20kHz +0 dB/–0.5 dB
THD+N <0.0019% 10Hz – 20kHz
Dynamic Range >109 dB (A-weighted) A/A
Crosstalk typical <–80 dB 20Hz – 20kHz
Digital Input and Output
Connectors Dual RCA phono (S/PDIF)
Format S/PDIF 24-bit
Sample Rate 44.1 or 48kHz
Processing Delay 3.7 ms @ 48 kHz
Frequency Response 10Hz to 22kHz ±0.5 dB @ 48kHz
Control Interface
USB USB 1.0 for MX-EDIT™ Editor/Librarian
and VST™/Audio Units plug-ins
MIDI In/Out 5-pin DIN
Foot Pedal ¼" phone jack
General
Power 117 VAC or 230 VAC, 18 Watts
Size (W/H/D) 19" x 1.75" x 7.25"*/6.375"
(483 x 44 x /185mm*/162 mm)
Weight 5.8 lbs (2.6 kg)
*including knobs.
MX400 Specifications
#18-0336
REVERBS
Small Hall
Large Hall
Surround Hall
Small Plate
Large Plate
Room
Chamber
Gated
DELAYS
Studio Delay
Digital Delay
Tape Delay
Pong Delay
Mod Delay
Reverse Delay
2-Tap Delay
Reverse
Vocal Hall
Vocal Plate
Drum Hall
Drum Plate
Ambience
Studio
Arena
Spring
dbx
®
DYNAMICS
Compressor
De-Esser
MODULATED EFFECTS
Chorus
Flanger
Phaser
Tremolo / Pan
Rotary
Vibrato
Pitch Shift
Detune
All MX400 reverbs, delays, dynamics
and effects parameters can be
accessed and edited from the
included VST® and Audio Units
plug-ins.
Seven Effects Routing Options
Also available: e
MX400XL with balanced
XLR inputs and outputs
Standard IEC line cord
— no wall wart!
USB to your computer.
Footswitch jack.
MIDI In and Thru. Dual S/PDIF digital
inputs and outputs
¼" TRS balanced / unbalanced outputs. ¼" TRS balanced / unbalanced inputs.
Input gain level controls.
Dual stereo Gain LED ladders.
Configuration LEDs. Main LCD screen shows
routing configurations,
program names, effects
and parameters, System
settings.
Page Select
knob for choosing
effects & System
menus.
Exit button.
Tempo manually
sets delay times.
Effect Bypass.
Three Parameter
adjustment knobs.
Program Bypass.
User/Factory program LEDs.
System menu access.
Stores or copies programs
to memory settings.
Program/Load selects
factory or user programs.
Program indicator.
e MX400 lets you switch effect routings automatically
via front panel controls, so you don’t have to spend time
behind your rack changing cables to instantly re-purpose its
four powerful processors.
From basic quad mono, to
stereo to more complex dual
stereo configurations, you can
have ‘em all at the twist of a
knob.
Sandy, UT, USA
801.566.8800
lexiconpro.com
©2006 All Rights Reserved, Harman
International Industries Inc. Specifications
subject to change Lexicon and MX-Edit
are trademarks of Harman International
Industries, Inc. VST is a trademark of
Steinberg Soft- und Hardware GmbH. Mac
is a trademark of Apple Computer Corp.
P/N 18-0459