Lexicon PCM-41 User Manual

General overview of the PCM 41's capabilities, features, and sonic quality.

Essential safety warnings and operational guidelines before initial use.

Details the knobs, buttons, and LED indicators on the front panel.

Describes the rear panel connectors, switches, and input/output jacks.

Covers physical installation, rack mounting, ventilation, and electrical power needs.

Explains how to connect audio sources and outputs using various jacks.

Guides on setting input and output signal levels for optimal performance.

Details external control options for bypass, repeat, and VCO functions.

Instructions for safely changing the unit's AC mains voltage setting.

Illustrates typical setup locations and configurations for the unit.

Explains various delay effects like doubling, echo, and ambience.

Provides specific front panel control settings for common delay effects.

Describes advanced setups using multiple units for enhanced sound manipulation.

Details a specific flanging effect using two PCM 41 units.

Explains how to connect and use the PCM 41 with the Model 93 processor.

Discusses using delay for precise stereo imaging and panning.

Explains using delay to prevent unwanted echoes in distributed audio systems.

Provides a technical overview of the unit's internal signal flow and components.

Lists key performance metrics like distortion, noise, and frequency response.

Details input/output types, impedance, signal levels, and remote jack functions.

Summarizes the function of front panel controls and indicators.

Lists electrical power requirements and physical dimensions of the unit.

General guidance and warnings before troubleshooting.

Troubleshooting steps for power-related issues.

Troubleshooting steps for audio signal problems.

Procedures for sending the unit for service and warranty claims.

Details on ordering spare parts for the PCM 41.

Outlines the product's warranty coverage and limitations.