EasyManuals Logo

Lexicon PCM 91 User Manual

Lexicon PCM 91
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
UNPACKING AND INSPECTION
After unpacking the PCM 91, save all packing materials in case you ever need to ship the unit. Thoroughly inspect the PCM 91 and packing materials for signs
of damage. Report any shipment damage to the carrier at once; report equipment malfunction to your dealer.
PRECAUTIONS
Save these instructions for later use.
Follow all instructions and warnings marked on the unit.
Always use with the correct line voltage. Refer to the manufacturer's operating instructions for power requirements. Be advised that different operating voltages
may require the use of a different line cord and/or attachment plug.
Do not install the unit in an unventilated rack, or directly above heat producing equipment such as power amplifiers. Observe the maximum ambient operating
temperature listed in the product specification.
Slots and openings on the case are provided for ventilation; to ensure reliable operation and prevent it from overheating, these openings must not be blocked
or covered. Never push objects of any kind through any of the ventilation slots. Never spill a liquid of any kind on the unit.
This product is equipped with a 3-wire grounding type plug. This is a safety feature and should not be defeated.
Never attach audio power amplifier outputs directly to any of the unit's connectors.
To prevent shock or fire hazard, do not expose the unit to rain or moisture, or operate it where it will be exposed to water.
Do not attempt to operate the unit if it has been dropped, damaged, exposed to liquids, or if it exhibits a distinct change in performance indicating the need
for service.
This unit should only be opened by qualified service personnel. Removing covers will expose you to hazardous voltages.
This triangle, which appears on your component,
alerts you to the presence of uninsulated,
dangerous voltage inside the enclosure -
voltage that may be sufficient to
constitute a risk of shock.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This triangle, which appears on your component,
alerts you to important operating and
maintenance instructions in this
accompanying literature.

Other manuals for Lexicon PCM 91

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexicon PCM 91 and is the answer not in the manual?

Lexicon PCM 91 Specifications

General IconGeneral
TypeDigital Reverb Processor
MIDIIn/Out/Thru
Power Consumption25 Watts
A/D Resolution24-bit
D/A Resolution24-bit
Frequency Response20Hz - 20kHz ±0.25dB
Dimensions1.75" H x 19" W
Digital I/OAES/EBU
ControlFront panel, MIDI
Power Requirements100-240V, 50-60Hz

Related product manuals