2-39
Basic Operation
PCM 91
Press Load/✱ repeatedly to cycle through the remaining choices:
LowLabel, HighLabel, MidLabel, LowRange and HighRange. Names
are entered using ADJUST and SELECT in exactly the same manner.
• LowLabel: The name you assign will appear on the
bottom line of the display when the control
reaches the value set as the Low limit.
• HighLabel: The name you assign will appear on the
bottom line of the display when the control
reaches the value set as the High Limit.
• MidLabel: The name you assign will appear on the
bottom line of the display when the control
reaches the value set as the MidPoint. (This
naming display is not available if you have not
assigned a MidPoint within the range
established by the Low and High Limits.)
• LowRange: The name you assign here will be displayed
whenever the controller is between the
MidPoint and the Low Limit.
• HighRange: The name you assign here will be displayed
whenever the controller is between the
MidPoint and the High Limit.
You can display numerical values anywhere along the bottom line
of the display by entering the characters @ or $ where you want
values to appear. As many as three digits can be displayed,
representing absolute distance from the Low Limit (@@@), or
relative distance from the selected MidPoint ($$$). If the MidPoint
is at or below the Low Limit, this range will be equivalent to the
entire range of the controller. The default status of the label
displays includes @@@ already entered at the beginning of the
entry line. Check out the presets in the Custom row of any bank for
examples of Custom Controls.
Assigning KeyWords to an Effect
The last four positions of the Custom row allow as many as four
KeyWords to be assigned to the current effect. At each position
(KeyWord 1-4), use ADJUST to select a representative KeyWord
from the list shown below — or "none".
Effect sorting by KeyWord is accomplished in Control mode at
location1.8. To view the sorted list, repeatedly press either Program
Banks or Register Banks through all of the available banks, then to
the KeyWord display. In Control mode, A to Z is available as a
viewing selection. All effects are internally tagged to allow this
option of alphabetical sorting.
Acoustic
Ambience
Ballad
Bright
Broadcast
Cascade
Chamber
Classical
Cncrt Hall
Custom
Dark
Dialog
Drums/Perc
Dynamic
Echo
Film-ADR
Gated
Guitar
Indoor
Instrument
Keyboard
Large
Live PA
Long
Mastering
Medium
MIDI
Mono
Natural
Orchestral
Outdoor
Plate
RandomHall
Room
Short
Slap FX
Small
Spatial
Special FX
Splits
Stereo
Surround
Tempo
Unnatural
Vocal
User 1
User 2
User 3
User 4
Assignable KeyWords
To Next Page
Loading...
