29
* ENVELOPE Increases both modulation rates
ECHO FX LVL Delayed mod output level
MOD FX LVL Input level to Mod 1 and Mod 2
FEEDBACK 1 Total gain of feedback/cross-feed mix
FEEDBACK 2 Feedback/cross-feed mix
RATE 1 Mod 1 tap b glide rate
DEPTH 1 Mod 1 tap b glide range
RESONANCE 1 Mix of a and b taps for Mod 1 and Mod 2
RATE 2 Mod 2 tap b glide rate
DEPTH 2 Mod 2 tap b glide range
RESONANCE 2 Mod 1 and Mod 2 tap a tuning
B
2 ATMOSPHERE
Atmosphere
B has two modulators, each with two indepen-
dent taps (a and b), which allow you to create tunable reso-
nance effects. The modulators are in the feedback path of a
cross-mix configuration. When feedback is used, every echo
repeat is re-modulated.
ba
MOD 2
Fbk 1
Echo
Fx Lvl
Fbk 2
Fbk 2
Mod
Fx Lvl
ba
ECHO 1
Rate 1*
Depth 1
Res 1
Mod
Fx Lvl
Res 1
Echo
Fx Lvl
ECHO 2
Res 2
Res 2
MOD 1
Rate 2*
Depth 2
Fbk 1
ENVELOPE increases the rates of both modulators, causing
modulation to speed up during louder notes and passages. The
modulators in this effect are unique in that each has a gliding tap and
a stationary tap. RATE 1 and DEPTH 1 control the glide speed and
range of the gliding tap (b) of MOD 1. RATE 2 and DEPTH 2 control
the glide speed and range of the gliding tap (b) of MOD 2. RESO-
NANCE 2 controls the tuning of the stationary tap (a) in both MOD 1
and MOD 2. RESONANCE 1 controls the mix of the a and b tap levels
for both modulators. The character of the modulated sound can be
significantly altered with RESONANCE 1 and RESONANCE 2.
The cross-mix echo configuration is identical to that in
Atmo-
sphere
A.
Use the Preset to add a variety of atmospheric effects to your
sound.
To Next Page
Loading...
