35
* ENVELOPE Decreases total feedback level
ECHO FX LVL Delayed mod output level
MOD FX LVL Undelayed mod output level
FEEDBACK 1 Total gain of feedback/cross-feed mix
FEEDBACK 2 Feedback/cross-feed mix
RATE 1 MOD 1 speed
DEPTH 1 MOD 1 depth
RESONANCE 1 Left/right cross-resonance
RATE 2 MOD 2 speed
DEPTH 2 MOD 2 depth
RESONANCE 2 Left/right resonance
B
5 AEROSOL
Aerosol
B has two modulators which interact to produce a
variety of modulation effects (flanger, vibrato, chorus, etc.)
The modulators feed two echoes which are configured as a
bounce echo.
ENVELOPE decreases FEEDBACK 1, which controls the total
feedback level, so that loud signals have only a single echo repeat,
and soft signals have many. Using RESONANCE 2 alone (RESO-
NANCE 1=1) maintains a stereo image in the modulation effect.
RATE 1 and DEPTH 1 will affect left modulation; RATE 2, DEPTH 2
will affect right modulation.
Using RESONANCE 1 (cross-resonance) mixes the left and right
modulation signals together. The rate and depth controls will affect
both left and right.
Both echoes are arranged in series, but ECHO 1 feeds the left
output, while ECHO 2 feeds the right. This generates echoes that
bounce between left and right. FEEDBACK 2 controls the mix of
ECHO 1 feedback and ECHO 2 feedback. When this value is 1, this
mix is all ECHO 1 feedback. At 64, the mix is all ECHO 2 feedback.
Between these extremes, ECHO 1 is fed by a mixture of the two
feedbacks. These intermediate settings produce echo rhythms that
change over time.
The Preset uses MIX, MOD FX LVL, and ECHO FX LVL to create
a primarily dry sound, followed by pitch-modulated echoes which
alternate between left and right.
Echo Fx Lvl
MOD 1
Fbk 2
Rate 1
Depth 1
Rate 2
Depth 2
ECHO 2
Fbk 1*
ECHO 1
Mod Fx Lvl
Mod Fx Lvl
MOD 1
Res 1
Res 2
To Next Page
Loading...
