37
* ENVELOPE Decreases vibrato
ECHO FX LVL Echo output levels
MOD FX LVL Mod output levels
FEEDBACK 1 Feedback gain around ECHO 1 (use for bounce effects)
FEEDBACK 2 Feedback gain around ECHO 2 (use to pan L to R)
RATE 1 Speed of Multivibrato a voices
DEPTH 1 Depth of Multivibrato a voices
RESONANCE 1 1st Multivibrato resonance
RATE 2 Speed of Multivibrato b voices
DEPTH 2 Depth of Multivibrato b voices
RESONANCE 2 2nd Multivibrato resonance
B
6 MOSAIC
Mosaic
B has four modules arranged in series. Modulation
and echo effects are accumulated as signals progress through
this configuration.
ENVELOPE decreases the vibrato depths, causing modulation
effects to decrease with loud signals. The configuration allows you to
hear each step of the modulation and echo acumulation as it
progresses. The vibrato effect has two sets of stereo vibrato voices.
One set of voices (a) is controlled by RATE 1 and DEPTH 1. The other
set (b) is controlled by RATE 2 and DEPTH 2. The a voices shift in
pitch in opposition to each other, as do the b voices. This can be used
to produce very rich vibrato and chorus effects.
MOD FX LVL controls the direct output of MOD 1 (left) and MOD
2 (right). ECHO FX LVL controls the amount of echo fed into the
modulators, as well as the direct echo output. (ECHO 1 is left, ECHO
2 is right.)
The Preset produces a deep, resonant modulation with very tight
echoes. ENVELOPE is set to control modulation rate dynamically.
Echo
Fx Lvl
Rate 1, Rate 2
Depth 1, Depth 2*
Res 1
Mod Fx Lvl
ECHO 1
Fbk 1
Rate 1, Rate 2
Depth 1, Depth 2*
Res 2
MULTI
VIBRATO
Echo
Fx Lvl
ECHO 2
Fbk 2
Mod Fx Lvl
MULTI
VIBRATO
To Next Page
Loading...
