x
#Hearthedifference
GTX USER MANUAL
the music. If you only need to adjust the musicvolume, You need to exit the intercom first.)
Note: Individual audio adjustment is not available for phone and intercom working
simultaneouslyq
Play/Pause
With the unit powered on, click the Power Button to play a song.
When the music is playing, click the Power Button to pause.
Note: In multiple audio modes (when in intercom talk and playing music simultaneously) ,
pausing music needs to double click the power button.
Change Song
When the music is playing, double click the UP button for the nextsong, double click the
DOWMbutton for the previous song.
Turn on/off the multiple audio functions
n the standby state, long pressthe down button for about six seconds to activate
/inactivate the multiple audio functions.
Note:
l. The default isto inactivate the multiple audio functions. You needto reset
everything while using.
2.The multiple audio functions only support using a 2-ways intercom. It is unusable
in more than two ways intercom.
Bluetooth Intercom Paring & Connection
GTXBluetooth headsets are able to full-duplex Bluetooth intercom talk, a pre pairing group
internal intercom, divided into 4-way intercom mode and multi-way intercom mode,
multi-way intercom mode can achieve up to 10 riders to be connected.
Note: Before Bluetooth group intercom pairing, the devices must be in the same mode
(four-way intercom mode or multi-way intercom mode). Ifthe devices are not in the same
mode, they will not be able to pair.
Clear Bluetooth Pairing Record
Pressand hold the Up Button and the Down Button at the same time for 2 seconds.The
indicator light flashes red.
Everytime you turn on the GTXdevice, the default is 4-way intercom mode, and to
switch into the multi-way intercom mode which is for more than five riders
(including five riders), in the standby state, you need to long press down button for
about 6 seconds, there will be a beep and the indicator light flashes red quickly at
11
To Next Page
Loading...
