41
Reinserting the print cartridge
1 Remove the print cartridge. See page 31.
2 Insert the print cartridge. See page 32.
3 Print your photo again.
Wiping the print cartridge nozzles and contacts
1 Remove the print cartridge. See page 31.
2 Dampen a clean, lint-free cloth with water and place it on a level
surface.
Note: Place two pieces of paper under the cloth to avoid
getting ink on the work surface.
3 Gently hold the nozzles against the cloth for about three seconds,
and then wipe in the direction shown.
4 Gently hold the contacts against another clean section of cloth for
about three seconds, and then wipe in the direction shown.
To Next Page
Loading...
