Lexmark C748e - Configuration Menu (CONFIG MENU); Available Tests

Diagnostic aids 3-27
5026
Go Back
Previous
Next
Configuration menu (CONFIG MENU)
Available tests
The tests display on the operator panel in the order shown.
Reset Fuser Cnt See “Reset Fuser Cnt” on page 3-28.
Color Lock Out See “Color Lock Out” on page 3-28.
Print Quality Pages See “Print Quality Pages” on page 3-28.
Reports
Menu Settings Page See “Menu Settings Page” on page 3-29.
Event Log See “Event Log” on page 3-29.
Color Trapping See “Color Trapping” on page 3-29.
Tray Insert Msg See “Tray Insert Msg” on page 3-29.
Panel Menus See “Panel Menus” on page 3-29.
PPDS Emulation See “PPDS Emulation” on page 3-30.
Download Emuls (if available) See “Download Emuls” on page 3-30.
Demo Mode See “Demo Mode” on page 3-30.
Factory Defaults See “Factory Defaults” on page 3-30.
Energy Conserve See “Energy Conserve” on page 3-30.
Automatic Color Adjust See “Automatic Color Adjust” on page 3-31.
Auto Align Adj See “Auto Align Adj” on page 3-31.
Color Adj State See “Color Adj State” on page 3-31.
Enforce Color Order See “Enforce Color Order” on page 3-31.
Color Alignment See “Color Alignment” on page 3-31.
Motor Calibration See “Motor Calibration” on page 3-32.
Paper Prompts See “Paper Prompts” on page 3-32.
Envelope Prompts See “Envelope Prompts” on page 3-32.
Action for Prompts See “Action for Prompts” on page 3-32.
Jobs on Disk (if hard disk is installed) See “Jobs on Disk” on page 3-32.
Disk Encryption (if hard disk is
installed)
See “Disk Encryption” on page 3-33.
Wipe Disk (if hard disk is installed) See “Wipe Disk” on page 3-33.
Wipe All Settings See “Wipe All Settings” on page 3-33.
Duplex Gloss See “Duplex Gloss” on page 3-34.
Font Sharpening See “Font Sharpening” on page 3-34.
Require Standby See “Require Standby” on page 3-34.
UI Automation See “UI Automation” on page 3-34.
Key Repeat Initial Delay See “Key Repeat Initial Delay” on page 3-34.
Key Repeat Rate See “Key Repeat Rate” on page 3-34.
Clear Custom Status See
“Clear Custom Status” on page 3-34.
USB Speed See “USB Speed” on page 3-34.
Automatically Display Error Screens See “Automatically Display Error Screens” on page 3-35.