4 Turn the printer off. Open the front cover.
5 Remove all the print cartridges.
a Pull up slightly on the cartridge handhold.
b Pull the cartridge straight out and use the
handle to lift it off the guides.
c Place the cartridges on a clean, flat surface
out of direct light.
6 Release the latches to open the multipurpose
feeder (area A) all the way.
7 Remove the image transfer unit.
a Raise the lever to unlock the image transfer
unit.
b Pull down on the handle.
c Slide the image transfer unit out and place it
on a clean, flat surface.
Warning: Do not touch the transfer belt.
Touching the belt will damage the
image transfer unit.
8 Look inside the printer. Remove all torn paper
or other jams.
9 Insert the image transfer unit back into the
printer.
To Next Page
Loading...
