25
4
Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges of the stack on a level surface.
5 Place the paper in the tray as shown, print side down.
Do not load bent or wrinkled paper.
Note: Do not exceed the maximum stack height. Overfilling the tray may cause jams.
6 Squeeze the front guide lever and slide the guide until it firmly touches the stack of paper.
7 Reinstall the tray.
Make sure the tray is pushed completely into the printer.
Maximum stack height
indicator
To Next Page
Loading...
