Lexmark C792 Printing Guide

Notes:
• Place the print side facedown for duplex printing.
• Place pre-punched paper with the holes toward the front of the tray.
• Place letterheads faceup with the header on the left side of the tray.
• Place letterheads facedown with the header on the right side of the tray for duplex printing.
• Make sure the paper is below the maximum fill line located on the edge of the paper tray. Overloading the tray can cause
paper jams and possible printer damage.
6 Insert the tray.
7 From the printer control panel, verify the Paper Size and Paper Type for the tray based on the paper you loaded.
Setting the paper size and type
The Paper Size setting is automatically sensed according to the position of the paper guides in each tray except the multipurpose
feeder. The Paper Size setting for the multipurpose feeder must be set manually from the Paper Size menu. The Paper Type
setting must be set manually for all trays that do not contain plain paper.
From the home screen navigate to:
> Paper Menu > Paper Size/Type > select a tray > select the paper size or type >
The factory default Paper Type setting is Plain Paper.
Printing guide
Page 3 of 3

Lexmark C792 Specifications

General

Print Technology	Color Laser
Print Speed	Up to 50 ppm
Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Processor Speed	1.2 GHz
Monthly Duty Cycle	Up to 150, 000 pages
Connectivity	Ethernet, USB 2.0
Display	Color Touch Screen
Recommended Monthly Volume	2, 000 to 15, 000 pages
Input Capacity	650 pages (Standard)
Output Capacity	500 pages
Interface	USB 2.0
Supported Operating Systems	Windows, macOS, Linux
Hard Drive	Optional
First Print Out Time B/W	8.5 seconds
Media Type	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Media Sizes	A4, A5, A6, Legal, Letter, Executive