Printing a booklet
26
2 Choose a paper type, print quality, and layout:
a From the software program, choose File Print.
b From the pop-up menu in the upper left corner, choose Paper Type/Quality.
c From Print Quality, select your preferred print quality. Normal is the default.
Note: Higher print quality settings result in better quality documents, but may take longer
to print.
d From the pop-up menu in the upper left corner, choose Layout.
e Click Booklet.
f From the Booklet pop-up menu, choose the appropriate number of sheets to bundle (2, 4,
8, 16, or 32).
Note: A bundle is the group of pages that are folded in half and stacked before binding.
When printing with thick paper, choose a smaller number of sheets to bundle for
easier binding.
Step 3: Print your booklet
1 Click Print.
After the first half of your booklet prints, your printer software prompts you to reload the
paper.
2 Remove the stack from the paper exit tray.
3 Load the stack of paper and the reloading instruction page with the printed side facing away
from you and the arrows pointing down into the paper support.
4 Click Continue.
To Next Page
Loading...
