Lexmark CX827 - Page 102

Menu item Description
Memory Use
All receive
Mostly receive
Equal*
Mostly send
All send
Set the amount of internal printer memory allocated for faxing.
Note: This menu item prevents memory
buer
conditions and failed faxes.
Cancel Faxes
Allow*
Don't Allow
Cancel outgoing faxes before they are transmitted, or cancel incoming faxes
before they finish printing.
Fax Number Masking
O*
From Left
From Right
Specify the format for masking an outgoing fax number.
Digits to Mask
0–58 (0*)
Specify the number of digits to mask in an outgoing fax number.
Enable Line Connected
Detection
O
On*
Determine whether a telephone line is connected to the printer.
Note: Detection takes place when turning on the printer and before each call.
Enable Line In Wrong Jack
Detection
O
On*
Determine whether a telephone line is connected to the correct port on the
printer.
Note: Detection takes place when turning on the printer and before each call.
Enable Extension in Use
Support
O
On*
Determine whether a telephone line is used by another device, such as another
phone on the same line.
Note: Detection takes place when turning on the printer and before each call.
Optimize Fax Compatibility Configure the printer fax functionality for optimal compatibility with other fax
machines.
Fax Transport
Analog*
etherFAX
None
Set the fax transport method.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 102