Supplies information
107
Recognizing the operator panel light sequences
The operator panel displays certain light sequences to let you know when the toner level is low or
when it’s time to replace the photoconductor kit.
Note: The operator panel may also display other light sequences in conjunction with the
“Toner low” and “Replace photoconductor kit” lights.
Printer condition Toner low Photoconductor
kit near full
Replace
photoconductor
kit
Replace
photoconductor
kit
(printer hard
stop)
*
For more information, see page: 63 64 64 65
Continue
Ready
Toner Low/
Replace PC Kit
Load Paper
Paper Jam
Error
* If the operator panel lights display this sequence, the printer will not print
any more jobs until the photoconductor kit is replaced.
To Next Page
Loading...
