K
Kathleen ReeseAug 22, 2025
Why is my Lexmark Printer printing blank pages?
- MMichael RoweAug 22, 2025
If your Lexmark printer is producing blank pages, the toner cartridge may be defective or empty, try replacing it.
To Next PageTo Next PageWhy is my Lexmark Printer printing blank pages?
If your Lexmark printer is producing blank pages, the toner cartridge may be defective or empty, try replacing it.
Why is my Lexmark E238 printing too light?
If your Lexmark printer's output is too light, it could be due to several reasons. The Toner Darkness setting might be set too light; adjust it in the printer driver. The paper you're using might not meet the printer's specifications, so try loading paper from a new package and avoid textured paper. Also, the toner cartridge might be low or defective, consider replacing it.
What to do if my Lexmark E238 has print irregularities?
If you notice print irregularities with your Lexmark printer, it could be due to several factors. The paper may have absorbed moisture due to high humidity, so try loading paper from a fresh package. Ensure you are using paper that meets the printer's specifications and avoid textured paper with rough finishes. Also, ensure the printer driver paper type setting matches the type of paper you are using. In some cases, the fuser might be worn or defective, and you may need to replace it.
Why is my Lexmark Printer printing solid black pages?
If your Lexmark printer is producing solid black pages, the toner cartridge may be defective, try replacing it. Alternatively, your printer might require servicing.
How to fix toner specks on Lexmark E238?
If you are experiencing toner specks on your prints from Lexmark Printer, it could be due to a defective toner cartridge, a worn or defective fuser, or toner in the paper path. You can try replacing the toner cartridge or replacing the fuser. If the problem persists, consider calling for service.
How to reset Lexmark E238 Printer to factory defaults?
To reset your Lexmark printer to the original factory default settings: 1. Turn off the printer. 2. Open the front cover. 3. Press Continue as you turn the printer back on. 4. Keep pressing Continue until the Error light comes on, then release the Continue button. 5. Close the front cover. 6. As the printer warms up, the top four lights come on. 7. Press Cancel. 8. Press Continue until the operator panel cycles through all of the lights. 9. When the top four lights come on, release the Continue button. 10. Turn the printer off and back on. Factory defaults have been reset.
How to fix gray background on Lexmark E238 prints?
If your Lexmark printer is producing prints with a gray background, the Toner Darkness setting may be too dark. Try selecting a different Toner Darkness setting from the printer driver before sending the job to print. Also, the toner cartridge may be defective, and you should try replacing it.
Why is my Lexmark E238 Printer printing too dark?
If your Lexmark printer's output is too dark, it could be because the Toner Darkness setting is too dark. Try selecting a different Toner Darkness setting from the printer driver before sending the job to print. Alternatively, the toner cartridge may be defective, and you should consider replacing it.
What to do if my Lexmark E238 Printer has uneven print density?
If your Lexmark printer is producing prints with uneven density, the toner cartridge may be defective. Try replacing the toner cartridge.
Why does my Lexmark E238 print slower when using the manual feeder?
The printer sometimes prints at a slightly slower speed when feeding print media from the manual feeder. This is normal.
General| Print Technology | Laser |
|---|---|
| Print Speed | 30 ppm |
| Print Speed (Black) | 30 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Print Resolution (Black) | 1200 x 1200 dpi |
| Duplex Printing | Manual |
| Paper Input Capacity (Standard) | 250 sheets |
| Paper Capacity | 250 sheets |
| Paper Output Capacity | 100 sheets |
| First Page Out Time | As fast as 8.5 seconds |
| Maximum Duty Cycle | 30, 000 pages per month |
| Monthly Duty Cycle | 30, 000 pages per month |
| Connectivity | USB |
| Maximum Paper Size | Legal (8.5 x 14 inches) |
| Media Sizes Supported | Letter, Legal |
| Operating System Compatibility | Windows, Mac OS |
Provides safety information regarding the printer's laser components.
Advice on selecting appropriate paper, envelopes, and other media for best results.
Step-by-step guide to resolving paper jam issues.
Instructions for performing double-sided printing.
Methods for canceling active print jobs from the printer or computer.
Explanation of the different light sequences and their meanings.
Details on secondary error conditions indicated by operator panel lights.
Explanations of primary and secondary light sequences and error codes.
Guide to using the utility for changing advanced printer settings.
Lists required supplies and provides ordering information.
Methods to determine when toner or photoconductor replacement is needed.
Step-by-step instructions for replacing the toner cartridge.
Instructions for replacing the photoconductor kit.
Solutions for common printer issues and questions.
Diagnosing and resolving issues related to print output quality.
