Lexmark E220

Other manuals for Lexmark E220

Setup Guide56 pages

Quick Reference2 pages

Questions and Answers:

M
Mrs. Tammy LynchSep 23, 2025
What to do if paper fails to feed from the optional 250-sheet tray in my Lexmark Printer?
- C
  Crystal LeeSep 23, 2025
  If the paper fails to feed from the optional 250-sheet tray in your Lexmark Printer: 1. Make sure the optional 250-sheet tray is selected from the printer driver. 2. Make sure the tray is pushed all the way in. 3. Make sure the metal plate is pressed down. 4. Make sure the paper is under both corner bucklers. 5. Make sure the paper does not exceed the stack height indicator. 6. Remove the paper from the optional 250-sheet tray, and then fan the paper.
D
Daniel JacksonAug 25, 2025
What to do if my Lexmark Printer is on but not printing?
- B
  Barbara Smith MDAug 25, 2025
  If your Lexmark Printer is on but nothing is printing, make sure the print cartridge is installed and that the parallel or USB cable is firmly plugged into the connector on the back of the printer. Press and release Continue to print a menu settings page to determine if the problem is with the printer or the computer. If you can print a menu settings page, the problem is in the computer or the software application. If you cannot print a menu settings page, call for service.
M
michellelivingstonAug 25, 2025
What to do if paper doesn't feed from tray 1 in my Lexmark E220 Printer?
- S
  solisrobinAug 26, 2025
  If paper fails to feed from tray 1 on your Lexmark Printer, remove the paper from tray 1 and fan the paper. Make sure tray 1 is selected from the printer driver, and do not overfill the tray.
M
marcus58Aug 27, 2025
Why are the characters light or blurred on my Lexmark E220?
- J
  Jerome PhillipsAug 27, 2025
  If you are seeing light or blurred characters when printing with your Lexmark Printer, it could be due to a few reasons. The print cartridge may be getting low on toner. If you do not have a replacement cartridge, remove the print cartridge, shake it from side to side to use the remaining toner, and then reinstall it. Ensure that you are using recommended print media. If you are printing on special media like card stock or labels, make sure you selected the correct paper type in the printer driver. The printer might also be detecting a print cartridge error, in which case you should replace it.
M
Michael SharpAug 27, 2025
How to fix toner smudges on Lexmark E220 output?
- D
  david87Aug 27, 2025
  If toner smudges are appearing on the front or back of pages printed from your Lexmark Printer, make sure the paper is straight and unwrinkled. If the issue persists, replace the print cartridge.
J
Joseph AdamsSep 13, 2025
Why does my Lexmark E220 stop printing when the Toner Low light is on?
- T
  Tracy VazquezSep 13, 2025
  If the Toner Low light is on and printing stops on your Lexmark Printer, and if the Toner Low alarm is enabled, the printer stops printing until you replace the print cartridge. To change the Toner Low Alarm setting, install the Local Printer Setup Utility from the drivers CD.
K
Kristen VillarrealSep 12, 2025
Why are there solid black areas or white streaks on my Lexmark Printer output?
- B
  Benjamin ClarkSep 12, 2025
  If solid black areas appear on transparencies or paper contains white streaks when using your Lexmark Printer, choose a different fill pattern in your software application. Try a different type of paper, such as paper designed for copiers. Remove the print cartridge and shake it from side to side to use the remaining toner. If the problem persists, replace the print cartridge.
C
Christy RodriguezSep 12, 2025
Why is my Lexmark E220 Printer printing light when the toner isn't low?
- C
  Cassandra RoblesSep 12, 2025
  If the print is getting light, but the Toner Low light is not on for your Lexmark Printer, especially if the 1,500-page starter print cartridge is installed, remove the print cartridge and shake it from side to side to use the remaining toner. If you do not have a replacement cartridge, order one now. If the problem persists, replace the print cartridge.
W
Wendy JonesSep 4, 2025
How to prevent media skewing or buckling in my Lexmark Printer?
- K
  Katie TaylorSep 4, 2025
  If the media skews or buckles when using your Lexmark Printer, do not overfill tray 1 or the optional 250-sheet tray. Make sure the paper guides are flush against the edges of the media.
R
richard88Sep 2, 2025
How to fix faint images or spots on Lexmark Printer output?
- M
  Mary WilliamsSep 2, 2025
  If faint images or repetitive spots appear on the page when using your Lexmark Printer, try a different type of paper, such as paper designed for copiers, or replace the print cartridge.