Maintenance
74
6
Maintenance
Conserving supplies
Conserving supplies lowers printing costs.
• When printing drafts, conserve toner by changing the Print Darkness setting in your printer driver. The
settings range from Very Light to Very Dark. Selecting the Very Light setting conserves toner.
• Reduce paper consumption by printing on both sides of the paper.
Ordering supplies
Within the United States or Canada, you can order Lexmark supplies from any authorized Lexmark
supplies dealer. To locate the dealer nearest you, just call 1-800-539-6275. In other countries or
regions, visit the Lexmark online store at www.lexmark.com or contact the place where you bought
your printer.
When the Toner Low light comes on (in this example, the light is on while the printer is busy receiving
data or printing), check that you have a new print cartridge.
Note: The Toner Low light does not come on if the 1,500-page starter print cartridge is
installed.
To use the remaining toner, remove the print cartridge, shake it gently back and forth, and reinsert it.
When the print fades or no longer prints satisfactorily, replace the print cartridge.
Press Continue
Error
Paper Jam
Load Paper
Toner Low
Ready/Data
Continue
Cancel
To Next Page
Loading...
