Using the Local Printer Setup Utility
73
Understanding the printer configuration menus
Using the Local Printer Setup Utility
The Local Printer Setup Utility, located on the drivers CD, lets you change printer settings not
available from your printer driver (for example, activating Alarm Control if you want the printer to
sound an alarm when it needs attention). Follow the instructions on the drivers CD to install the Local
Printer Setup Utility on your computer.
You can change the following settings using the Local Printer Setup Utility:
Paper Settings
Paper Source
Paper Size (per supported sources)
Paper Type (per supported sources)
Custom Types (per custom type number)
Substitute Size
Configure MP
Paper Texture (per supported media)
Paper Weight (per supported media)
Paper Loading (per supported media)
PostScript Settings
Print PS Error
Font Priority
Finishing Settings
Duplex
Duplex Bind
Copies
Blank Pages
Collation
Separator Sheets
Separator Source
Multipage Print
Multipage Order
Multipage View
Multipage Border
PCL Emulation Settings
Orientation
Lines Per Page
A4 Width
Tray Renumber (per
supported sources)
Auto CR after LF
Auto LF after CR
USB Settings
PCL SmartSwitch
PS SmartSwitch
USB Buffer
Setup Settings
Printer Language
Power Saver
Resource Save
Download Target
Print Timeout
Wait Timeout
Auto Continue
Jam Recovery
Page Protect
Print Area
Display Language
Alarm Control
Toner Alarm
Quality Settings
Print Resolution
Toner Darkness
PQET
PictureGrade™
Parallel Settings
PCL SmartSwitch
PS SmartSwitch
Parallel Buffer
Advanced Status
Honor Init
To Next Page
Loading...
