50
Operator panel codes
Busy
Hex Trace Ready
Light sequence:
• Ready—Blink
What this light sequence means:
• The printer is busy receiving and processing data or printing.
• The printer is printing a directory, font list, menu settings pages, or Print
Quality Test Pages.
What you can do:
• Busy:
– Wait for the message to clear.
– Press and release Cancel to cancel the print job.
– Press and hold Cancel to reset the printer.
• Printing a directory, a font list, menu settings pages, or Print Quality Test
Pages:
– Wait for the pages to print. The Busy message is displayed as the
pages print. The Ready light is on when printing stops.
– Press and release Cancel to cancel printing.
– Press and hold Cancel to reset the printer.
• Receiving/processing data from a host interface:
– Wait for the message to clear.
– Press and release Cancel to stop processing.
– Press and hold Cancel to reset the printer.
Light sequence:
• Ready—Slow blink
What this light sequence means:
The printer is in the Ready mode, and Hex Trace is active.
What you can do:
• Advanced users can use Hex Trace to help troubleshoot printing problems.
After resolving the problem, turn off the printer to exit Hex Trace.
• Press and hold Cancel to reset the printer.
To Next Page
Loading...
