Lexmark E238 - Page 51

51
Operator panel codes
Waiting
Flushing / Resolution reduced
Light sequence:
• Continue—On
• Ready—On
What this light sequence means:
The printer is waiting until a print timeout occurs, or until it receives additional data.
What you can do:
• Press Continue to print the contents of the print buffer.
• Press and release Cancel to cancel the print job.
• Press and hold Cancel to reset the printer.
Light sequence:
• Ready—Blink
• Error—Blink
What this light sequence means:
• The printer is flushing corrupted print data.
• The printer is processing data or printing pages, but the resolution of a
page in the current print job is reduced from 600 dots per inch (dpi) to 300
dpi to prevent a memory full error.
What you can do:
• Wait until the operator panel returns to Ready to print other jobs.
• Press and release Cancel to cancel the print job.
• Press and hold Cancel to reset the printer.