2-26 Lexmark™ E250d and E250dn
4512-220, -230
Fuser, fan, or toner sensor error
Codes 920 through 929 indicate a problem in the fuser (see fuser service check...), a stalled fan motor, or a
faulty toner sensor or toner cartridge. Multiple errors indicate replacing the corresponding part.
Service tertiary error codes–fuser, fan, or toner sensor
Lights
Service secondary codes–92x ✷ ✷
Service tertiary codes–fuser, fan, or toner sensor
920–Fuser below temperature
when printing
✷
921–Fuser below standby
temperature at idle
✷ ✷
922–Fuser failed to reach standby
temperature ✷ ✷
923–Fuser too hot during printing
or idle ✷ ✷ ✷
924–Open circuit in thermistor
path ✷ ✷
925–Incorrect fuser ✷ ✷ ✷
927–Fan stalled ✷ ✷ ✷ ✷
929–Toner sensor or toner
cartridge are bad
✷ ✷ ✷
To Next Page
Loading...
