10. Remove the feed roller gear.
This has a tight fit. Pry off carefully.
11. Remove the two screws and the gear plate.
12. Remove the developer roller.
Clean the toner feed roller with compressed air.
13. Clean the white developer roller seals with a cotton swab.
LEXMARK E260 • 360 • 460 • X264 • 363 • 364 MFP TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.uninetimaging.com
To Next Page
Loading...
