Lexmark MB2442adwe - Page 66

Menu item Description
Device Operations
Minimum Copy Memory
20MB*
30MB
50MB
80MB
100MB
Set the memory allocation for storing copy jobs.
Note: The values appear only if the amount of installed
DRAM is at least twice the amount of the value.
Device Operations
Clear Custom Status
Erase user‑defined strings for the Default or Alternate custom
messages.
Device Operations
Clear all remotely‑installed messages
Erase messages that were remotely installed.
Device Operations
Automatically Display Error Screens
On*
O
Show existing error messages on the display after the printer
remains inactive on the home screen for a length of time equal
to the Screen Timeout setting.
Device Operations
Honor orientation on fast path copy
O*
On
Enable the printer to use the Orientation setting under the
Copy menu when sending quick copy jobs.
Scanner Configuration
Scanner Manual Registration
Front ADF Registration
Rear ADF Registration
Flatbed Registration
Manually register the flatbed and ADF after replacing the ADF,
scanner glass, or controller board.
Scanner Configuration
Edge Erase
ADF Edge Erase
0–6 (3*)
Flatbed Edge Erase
0–6 (3*)
Set the size, in millimeters, of the no‑print area around an ADF
or flatbed scan job.
Scanner Configuration
Disable Scanner
Enabled*
Disabled
ADF Disabled
Disable the scanner if it is not working properly.
Scanner Configuration
Scanner Manual Registration
Print Quick Test
Print a test page that shows the scanner margin settings.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 66