Lexmark MB2546 User Manual

2 Locate the printer serial number behind the front door.
Selecting a location for the printer
• Leave enough room to open trays, covers, and doors and to install hardware options.
• Set up the printer near an electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not place or use this product
near water or wet locations.
• Make sure that airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical
Committee 156 standard.
• Provide a flat, sturdy, and stable surface.
• Keep the printer:
– Clean, dry, and free of dust
– Away from stray staples and paper clips
– Away from the direct
airflow
of air conditioners, heaters, or ventilators
– Free from direct sunlight and humidity extremes
• Observe the recommended temperatures and avoid fluctuations.
Ambient temperature 10 to 32.2°C (50 to 90°F)
Storage temperature 0 to 40°C (32 to 104°F)
• Allow the following recommended amount of space around the printer for proper ventilation:
Learning about the printer 12

Lexmark MB2546 Specifications

General

Print Technology	Laser
Functionality	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Memory, Standard	512 MB
Fax Transmission Speed	33.6 kbps
Scan Resolution	600 x 600 dpi
Operating Systems Supported	Windows, macOS, Linux
Print Speed (Black)	46 ppm
Standard Paper Capacity	250 sheets
Connectivity	USB, Ethernet, Wi-Fi
Processor Speed	1 GHz
Connectivity, Standard	USB 2.0, Ethernet
Copy Speed (Letter, Black)	46 pages per minute
Copy Reduce / Enlarge Range	25% to 400%
Scan Technology	CIS