Option Height Width Depth Weight
Staple, hole punch
finisher
1065 mm (41.93 in.) 641 mm (25.24 in.) 658 mm (25.91 in.) 43.2 kg (95.2 lb)
Hole punch booklet
finisher
1065 mm (41.93 in.) 641 mm (25.24 in.) 658 mm (25.91 in.) 67.2 kg (148.2 lb)
Staple finisher 195 mm (7.68 in.) 473 mm (18.62 in.) 584 mm (22.99 in.) 12.0 kg (26.46 lb)
Other options
Working shelf
*
79 mm (3.11 in.) 465 mm (18.31 in.) 233 mm (9.17 in.) 1.6 kg (3.53 lb)
Keyboard kit 57.15 mm (2.25 in.) 282.7 mm (11.13 in.) 165.1 mm (6.5 in.) 1 kg (2.2 lb)
*
This applies only to multifunction products.
Dimensions of the printer in an open position
Printer model Height Width Depth
MS911 762 mm (30 in.) 953 mm (37.5 in.) 1127 mm (44.38 in.)
MX910de, MX911de, MX912de 1307 mm (51.44 in.) 953 mm (37.5 in.) 1246 mm (49.07 in.)
MX910dxe, MX912dxe 1553 mm (61.13 in.) 953 mm (37.5 in.) 1246 mm (49.07 in.)
Clearance requirements
Note: These clearance values are for the most compact operating configuration of the product. Additional clearance
(especially from the front) may be needed to utilize the multipurpose feeder, clear paper misfeed, lift the scanner lid (for
MFPs only), or replace toner and imaging unit.
Printer model Left side Right side Front Rear Top
MS911 120 mm (4.8 in.) 400 mm (15.7 in.) 444.5 mm (17.5 in.) 120 mm (4.8 in.) 150 mm (5.9 in.)
MX910, MX911,
MX912
120 mm (4.8 in.) 400 mm (15.7 in.) 444.5 mm (17.5 in.) 120 mm (4.8 in.) 400 mm (15.7 in.)
Environmental conditions
Note: When shipping or storing printers, always pack the printer supplies (such as cartridges) separately.
Environment Specifications
Air temperature (product operating) 10 to 30°C (50 to 86°F)
Air Relative Humidity 15 to 85% RH
Altitude 0–2500 m (8202 ft.)
Ambient operating environment 10 to 30°C (50to 86°F)
15 to 85% RH
MFP and packaged supplies storage/shipping ‑10 to 40°C (14 to 104°F)
10 to 85% RH
Cartridge/Imaging unit storage 50°C (122°F) for 8 hours, 25°C (77°F) for 16 hours
3 cycles, ≤ 40% RH
Printer specifications 18
To Next Page
Loading...
