Lexmark MS911 - PJL Messages for Auto-Continuable Conditions

PJL messages for auto-continuable conditions
= Supported
X = Not supported
Printer model
Message Status code Return string MS911
MX910, MX911,
MX912
Intervention Required -
PPDS Font Error
30014
PPDS font error
[50]
Intervention Required -
Insufficient Collation Area
30016
Insufficient
Collation Area [37]
XX
Intervention Required -
Insufficient Defragment
Memory
30016
Insufficient
Defrag Memory [37]
XX
Intervention Required -
Insufficient Memory
30016
Insufficient
memory, some Held
Jobs were deleted
[37]
Memory low, some
held jobs lost
[37]
*
XX
Intervention Required -
Insufficient Defragment
Memory
30016
Insufficient
memory, some Held
Jobs were deleted
[37]
XX
Intervention Required -
Insufficient Defragment
Memory
30016
Insufficient
memory, some Held
Jobs will not be
restored [37]
XX
Intervention Required -
Insufficient Defragment
Memory
30016
Insufficient
memory for Flash
Memory Defragment
operation [37]
Cannot defrag flash
memory [37]
*
XX
Intervention Required -
Insufficient Collation Area
30016
Insufficient
memory to collate
job [37]
Cannot collate
large document
[37]
*
XX
Intervention Required -
Memory Full
30016
Memory full [38]
Intervention Required -
Configuration Change
30016
Configuration
Change [57]
XX
Intervention Required -
Held Jobs May Not Be
Restored (57 Configuration
Change)
30016
Configuration
change, some held
jobs were not
restored [57]
* This message applies only to two‑line printers.
Appendix B: PJL support 42