Lexmark MS911 - Page 47

= Supported
X = Not supported
Printer model
Message Status code Return string MS911
MX910, MX911,
MX912
Intervention Required -
Too Many Disks Installed
32030
Too many disks
installed [58]
Intervention Required -
Too Many Trays Attached
32030
Too many trays.
Remove some. [58]
Intervention Required -
Unformatted Flash
32052
Unformatted flash
detected [53]
Flash memory
unformatted [53]
*
XX
Intervention Required -
Unformatted Disk
32052
Unformatted disk
[63]
XX
Intervention Required -
Unsupported Disk Format
32052
Unsupported Disk
Format [64]
XX
Intervention Required -
Defective Flash
32056
Defective Flash
[51]
XX
Intervention Required -
Defective Flash
32056
Defective flash
detected [51]
Defective flash
memory [51]
*
XX
Intervention Required -
Defective Disk
32056
Defective Disk [61]
XX
Intervention Required -
Defective Disk
32056
Remove defective
disk [61]
Intervention Required -
Scheduled Maintenance
35075
Scheduled
Maintenance [80]
XX
Intervention Required -
Scheduled Maintenance
40316
Scheduled
Maintenance [x]
[81]
XX
Intervention Required -
Belt Life Warning
40038
Belt Life Warning
[80]
XX
Intervention Required -
Belt Exhausted
40038
Belt Exhausted [80]
XX
Intervention Required -
Fuser Maintenance
40038
Fuser Maintenance
[80]
XX
Intervention Required -
Fuser Life Warning
40038
Fuser Life Warning
[80]
XX
Intervention Required -
Fuser Exhausted
40038
Fuser Exhausted
[80]
XX
Intervention Required -
Fuser/Belt Life Warning
40038
Fuser/Belt Life
Warning [80]
XX
* This message applies only to two‑line printers.
Appendix B: PJL support 47