Lexmark MX610 Series - Page 157

Use To
Eco-Mode
Off
Energy
Energy/Paper
Paper
Minimize the use of energy, paper, or specialty media.
Notes:
• Off is the factory default setting. This resets the printer to its
factory default settings.
• Energy minimizes the power used by the printer.
• Energy/Paper minimizes the use of power, paper, and
specialty media.
• Paper minimizes the amount of paper and specialty media
needed for a print job.
ADF Loaded Beep
Enabled
Disabled
Specify whether the ADF sounds a beep when paper is loaded.
Note: Enabled is the factory default setting.
Quiet Mode
Off
On
Minimize the printer noise.
Note: Off is the factory default setting.
Run Initial setup
Yes
No
Run the setup wizard.
Understanding the printer menus 157