Use To
Block No Name Fax
Off
On
Enable blocking of incoming faxes sent from devices with no station ID or fax ID
specified.
Note: Off is the factory default setting.
Banned Fax List Enable the list of blocked fax numbers stored in the printer.
Note: You can enter up to 512 characters.
Use To
Transmission Log
Print log
Do not print log
Print only for error
Enable printing of a transmission log after each fax job.
Note: “Print log” is the factory default setting.
Receive Error Log
Print Never
Print on Error
Enable printing of a receive error log following a receive error.
Note: Print Never is the factory default setting.
Auto Print Logs
On
Off
Enable automatic printing of fax logs.
Notes:
• On is the factory default setting.
• Logs print after every 200 fax jobs.
Log Paper Source
Tray [x]
Multipurpose Feeder
Specify the source of the paper used for printing logs.
Note: Tray 1 is the factory default setting.
Logs Display
Remote Station Name
Dialed Number
Specify whether printed logs display the dialed number or the station name or fax
name returned.
Note: Remote Station Name is the factory default setting.
Enable Job Log
On
Off
Enable access to the Fax Job log.
Note: On is the factory default setting.
Enable Call Log
On
Off
Enable access to the Fax Call log.
Note: On is the factory default setting.
Use To
Speaker Mode
Always Off
On until Connected
Always On
Specify the mode of the speaker.
Notes:
• On until Connected is the factory default setting. A sound is issued until the fax
connection is made.
• Always On turns the speaker on.
• Always Off turns the speaker off.
Speaker Volume
High
Low
Control the volume setting.
Note: High is the factory default setting.
Understanding the printer menus 175
To Next Page
Loading...
