Lexmark MX81x - Appendix A: Printer Specifications; Power Specifications; Operating Clearances

Appendix A: Printer specifications
Power specifications
The average nominal power requirements for the base printer configuration are shown in the following table (power
levels are shown in watts):
Printing States MX710 MX711 MX810 MX811 MX812
Off 0 W 0 W 0 W 0 W 0 W
Hibernate 0.7 W 0.7 W 0.7 W 0.7 W 0.7 W
Sleep State 14 W 15 W 16 W 16 W 16 W
Ready Low Power State 55 W 55 W 70 W 70 W 70 W
Ready State 110 W 110 W 120 W 120 W 120 W
Simplex Printing 825 W 925 W 760 W 860 W 960 W
Duplex Printing 625 W 725 W 575 W 675 W 775 W
Copying 860 W 960W 820 W 920 W 1020 W
ADF scanning 130 W 130 W 140 W 140 W 140 W
Typical Electricity
Consumption (Default)
6.8 kwh/wk 7.5 kwh/wk 7.1 kwh/wk 7.7 kwh/wk 8.1 kwh/wk
Typical Electricity
Consumption (Eco
Mode enabled)
5.0 kwh/wk 5.6 kwh/wk 4.9 kwh/wk 5.6 kwh/wk 6.0 kwh/wk
Max. (Avg) current
while printing:
100 - 110 Volts
115 - 127 Volts
220 - 240 Volts
12.4 A
10.7A
5.4 A
Maximum current shown in amps.
Notes:
• Using a power converter or inverter is not recommended.
• All MX71x and MX81x models conform to the ENERGY STAR standard.
• All models ship with Sleep Mode set to On.
Operating clearances
The following clearances must be maintained for proper ventilation and operation of the MX710/ MX810 Series MFPs
(including removing jobs from the exit tray, fully extending the paper input tray, and using the ADF):
1 Top 152.4 mm (6 in.)
2 Right 152.4 mm (6 in.)
7463
Appendix A: Printer specifications
733