Lexmark MX81x - Page 90

Assembly 19: 250-sheet tray option (MX710 and MX711)
Asm-index P/N Units/mach Units/FRU Description Removal procedure
1 40X8160 1 1 250-sheet tray option upper interface cable See
“Drawer upper
interface
cable
removal” on
page 505
2 40X8156 1 1 Sensor (pass through) See
“Sensor (drawer pass
through) removal ” on
page 510
3 40X8158 1 1 Sensor (pick) See “Sensor (pick) removal”
on page 512
4 40X7592 1 1 Sensor (pick roller position) See “Sensor (pick roll
position) removal ” on
page 501
5 40X7593 1 1 Pick roller See “Drawer pick roller
removal ” on page 501
6 40X8159 1 1 250-sheet tray option lower interface cable See “Drawer lower
interface
cable
removal” on
page 506
7 40X7713 1 1 Separator roller assembly See “Media tray separation
roller removal” on page
500
8 40X8154 1 1 250-sheet tray front cover See “Media tray front cover
removal” on page 500
9 40X8153 1 1 250-sheet tray See “Media tray assembly
removal” on page 500
10 40X8157 1 1 250-sheet tray option transport motor See “Drawer transport
motor removal” on
page 509
11 40X7591 1 1 Media feeder See “Drawer media feeder
removal ” on page 507
12 40X8672 1 1 250-sheet tray option controller PCBA See “Drawer controller
PCBA removal” on page
504
7463
Parts catalog
702