Lexmark X204N - X B/W Laser User Manual

4 Shake the cartridge in all directions to distribute the toner.
5 Install the new toner cartridge by aligning the rollers on the toner cartridge with the arrows on the tracks of the
photoconductor kit. Push the toner cartridge in as far as it will go. The cartridge clicks into place when correctly
installed.
3
DEF
6
M
NO
9
W
XYZ
#
2
A
BC
5
JK
L
8
T
UV
0
1
@
!
.
G
HI
4
P
Q
R
S
7
*
6 Close the front door.
Replacing the photoconductor kit
The printer automatically notifies you before the photoconductor kit reaches a page maximum by showing 84 PC
Kit life warning or 84 Replace PC Kit on the display. You can also see the status of the photoconductor
kit by printing a menu settings page.
When 84 PC Kit life warning or 84 Replace PC Kit first appears, you should immediately order a new
photoconductor kit. While the printer may continue to function properly after the photoconductor kit has reached
its official end-of-life, print quality significantly decreases.
Note: The photoconductor kit is one item only.
Maintaining the printer
119

Lexmark X204N - X B/W Laser Specifications

General

Print Technology	Laser
Scan Technology	CIS
Input Capacity	250 sheets
ADF Capacity	50 sheets
Maximum Copy Resolution	600 x 600 dpi
Scanner Type	Flatbed, ADF
Optical Scanning Resolution	600 x 600 dpi
Standard Output Capacity	150 sheets
Internal Memory	64 MB
Functions	Print, Copy, Scan, Fax
First Page Out Time	As fast as 8.5 seconds
Copy Reduction/Enlargement	25% - 400%
Fax Transmission Speed	33.6 kbps
Fax Resolution	300 x 300 dpi
Duplex Printing	Manual
Operating Systems Supported	Windows, Mac OS, Linux
Memory	64 MB
Copy Speed	Up to 24 cpm
Standard Connectivity	Ethernet, USB
Monthly Duty Cycle	10000 pages
Paper Handling	250-Sheet Input Tray
Print Speed	Up to 24 ppm
Print Resolution	1200 x 1200 dpi