38
IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server
Note: You can check the connection using the PSF/2 Print Submitter. A number of AFP print files are
delivered with the PSF/2 package. Any of these files can be submitted to the newly created print
queue.
Step 3 Enable Printer Sharing With the Job Interval Shutdown Timer
To enable the printer to start other print jobs from another protocol, interface or server, the PSF/2 tuning option
Job Interval Shutdown Timer is used.
Use the following steps to set the Job Interval Shutdown Timer option:
a) Start the PSF/2 control panel by selecting the PSF/2 folder and then the PSF/2 Control Panel icon.
b) On the PSF/2 Control Panel select P
rofile and then Change.
LAN IPDS Printer - Job Icon
To Next Page
Loading...
