Lexmark X644E - Page 7

7
IPDS Printer and Host Setup Guide AS/400 and iSeries LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server
How to find Job Buffering on the control panel: Job Buffering is only visible as a menu setting if there is a
hard disk installed in the printer. Press MENU or touch Menus and then select Network/Ports > Standard
Network > Job Buffering.
• Port 9600 - This port should only be used for receiving IPDS jobs. The printer’s Network Job Timeout
setting is automatically set to the correct setting for receiving IPDS jobs on this port. This port is only
provided for compatibility with some older printers. Port 5001 is the recommended port for printing IPDS
jobs.
Step 2 Create a PSFCFG
Note: Examples showing parameters displayed on an AS/400 may be different than the parameters
displayed on your system. Examples are shown with V5R2 parameters.
Define a PSF configuration object for your printer using
CRTPSFCFG. The PSFCFG object defined in this step
is referenced in the printer device description (
CRTDEVPRT). More than one printer can use this object.
Below is an example of a PSF configuration. The parameters in
bold are the parameters which must be
changed for printing IPDS jobs.
Example PSFCFG with parameters to change shown in bold.
PSF configuration PSFCFG >
IPDSPRT
(Note: IPDSPRT is a user defined name.)
Library............................... >
QGPL
User resource library list.. USRRSCLIBL *JOBLIBL
Device resource library list DEVRSCLIBL *DFT
+ for more values
IPDS pass through..................... IPDSPASTHR >
*NO <note1>
Activate release timer................ ACTRLSTMR *NORDYF
Release timer......................... RLSTMR >
*SEC15 <note2>
Restart timer......................... RESTRTMR *IMMED
APPC and TCP/IP retry count........... RETRY 15
Delay time between APPC retries....... RETRYDLY 90
Acknowledgement frequency............. ACKFRQ 100
Printer response timer................ PRTRSPTMR *NOMAX
Generate PDF output................... PDFGEN *NONE
Text 'description'.................... TEXT >
'IPDS Printer'
(Note: ‘IPDS Printer’ is user defined text.)
Additional Parameters
Automatic session recovery: AUTOSSNRCY
Enabled........................... *NO
Message option....................
Blank page............................ BLANKPAGE *YES
Page size control..................... PAGSIZCTL *NO
Resident fonts........................ RESFONT *YES
Resource retention.................... RSCRET *YES
Edge orient........................... EDGEORIENT *NO
Use outline fonts..................... USEOUTLFNT
*NO
<note3>
PSF defined option.................... PSFDFNOPT *NONE
Font substitution messages............ FNTSUBMSG *YES
Capture host fonts at printer......... FNTCAPTURE
*NO
<note4>
Font resolution for formatting........ FNTRSL *SEARCH
Font mapping table.................... FNTTBL *NONE
Library.............................