Lexmark X646DTE - Page 8

D: Loading Toner
E: Clearing Paper Jams
F: Cleaning the Scanner
G: More Information
A: Introduction
B: Copying
C: Loading Paper
Steps for Loading Paper
•
Tips for Loading Paper
•
The following topics are
covered in this section:
7
8
Tips for Loading Paper
Lexmark
™
X646dte MFP
User Guide
8
If you load any print media other than plain letter or A4 paper •
into any source, make sure you change the PAPER TYPE and
PAPER SIZE settings for that source.
When you load the tray, do not exceed the maximum stack •
height indicated by the label in the tray. Overfilling the tray may
cause jams. This applies to all printer trays, drawers and feeders.
Before loading print media into any source, flex the sheets back •
and forth to loosen them and then fan them.
Do not fold or crease the print media.•
Straighten the edges of the stack on a level surface.•
Complete these instructions to load print media into any of the •
standard or optional trays. All trays are loaded in the same way.