Paper jam inside the printer top access cover
1 Open the printer top access cover.
Warning—Potential Damage: To avoid overexposing the photoconductors, do not leave the front door open for
more than 10 minutes.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
2 Open the front door.
3 Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4 Close the front door, and then close the top access cover.
5 From the printer control panel, touch Continue, jam cleared.
Clearing jams 265
To Next Page
Loading...
