B
bradleyamyJul 26, 2025
What to do if Lexmark Printer shows Missing Cartridge error?
- VVincent BullockJul 26, 2025
If your Lexmark Printer displays a Missing Cartridge error, replace the missing cartridge.
To Next PageTo Next Page
What to do if Lexmark Printer shows Missing Cartridge error?
If your Lexmark Printer displays a Missing Cartridge error, replace the missing cartridge.
What to do if Lexmark Printer shows Defective Cartridge or Missing Cartridge error?
If your Lexmark Printer displays cartridge errors like 'Defective Cartridge' or 'Missing Cartridge', check the cartridge for any defects. Also, ensure that the cartridge is correctly installed in the printer.
What to do if Lexmark Printer displays 'Close Door or Insert Cartridge'?
If your Lexmark Printer shows a 'Close Door or Insert Cartridge' message, make sure that the front access door is completely closed and that the print cartridge is properly inserted.
What to do if Lexmark Printer shows Close Door or Insert Cartridge display?
If your Lexmark Printer displays 'Close Door' or 'Insert Cartridge', ensure the front access door is closed properly and the print cartridge is inserted correctly.
General| Color | Yes |
|---|---|
| Print technology | Laser printing |
| Package weight (imperial) | 6 lbs |
| Package dimensions (W x D x H) | 7.87 x 19.09 x 11.61 \ |
| Type | Original |
| Compatibility | Lexmark X792de Lexmark X792dte Lexmark X792dtfe Lexmark X792dtme Lexmark X792dtpe Lexmark X792dtse |
| Product color | Black, Blue |
| Printing colors | Cyan |
| Quantity per pack | 1 pc(s) |
| Color toner page yield | 20000 pages |
| Printing material shelf life | 2 year(s) |
| Harmonized System (HS) code | 84439990 |
Weight and Dimensions| Package weight | 2720 g |
|---|
Information regarding laser product certification and potential hazards for Class I laser products.
Details on the printer's internal Class IIIb laser system and its safety compliance.
Product safety based on original design, unauthorized parts, and professional servicing precautions.
Overview of manual chapters: General, Diagnostic, Repair, Connectors, Preventive Maintenance, Parts Catalog.
Lists available Lexmark X792 (7562-436) printer models with their specifications.
Guide on using diagnostic information to troubleshoot and repair printer issues.
Illustrates printer configuration options and identifies components like ADF, trays, and panels.
Provides power and operating specifications, including power requirements and acoustics.
Lists supported paper sizes by tray and type, along with weight specifications.
Provides guidance on selecting appropriate media for optimal print quality and feed reliability.
Explains paper characteristics affecting print quality: weight, curl, smoothness, moisture, and grain.
Lists necessary tools for printer service and maintenance procedures.
Guides users to relevant sections for diagnosing issues like POST sequence, print quality, paper jams, and errors.
Identifies error code ranges and their corresponding descriptions and page references.
Describes the printer's POST sequence and potential errors or messages that may appear.
Details paper jam numbers and locations, with instructions on how to resolve them.
Covers paper jams related to output options like the finisher and mailbox.
Addresses print quality issues, including troubleshooting steps and symptom tables.
Covers print quality issues related to the ADF and scanner, including dark print and vertical stripes.
Lists user prompts and error codes, providing actions to resolve them.
Details printer hardware errors (100-199) and their corresponding actions.
Troubleshooting for ADF and flatbed scanner errors, including manual disabling and controller card issues.
Troubleshooting for firmware and system electronics errors, including RIP errors and system board issues.
Provides symptom tables for base printer, 500-sheet, and 2000-sheet input options.
Detailed troubleshooting steps for various error codes and hardware failures.
Explains the printer's operator panel, buttons, and menus for navigation and diagnostics.
Details how to access Diagnostics, Configuration, Network SE, and SE menus for service.
Guide to entering Diagnostics mode for running printer diagnostic tests.
Describes tests for printing on media from various input sources and printing quality pages.
Details hardware tests including Panel Test, Button Test, DRAM Test, Serial Wrap Test, USB HS Test Mode, and Beacons Test.
Information on Duplex Quick Test and Duplex Top Margin Offset for duplex printing adjustments.
Tests for input trays including Feed Test and Sensor Test to verify correct operation.
Tests for output bins including Feed Test and Sensor Test to verify correct operation.
Tests for finisher operations: Staple Test, Hole Punch Test, Finisher Feed Test, and Finisher Sensor Test.
Tests sensors located inside the printer for correct operation, including media and input sensors.
Settings for printer defaults, page counts, serial number, model name, and configuration ID.
Instructions for safely handling ESD-sensitive parts to prevent damage, including precautions and wrist strap usage.
General guidance on removal procedures, including cable ties, cable/thermistor removals, and screws.
Procedure for removing the duplex assembly from the left access door.
Procedure for removing the HTU controller card after disconnecting cables and screws.
Diagram showing system board connectors.
Pinout details for JTRAY1, JUSB1, JWTB1, JWTBF1, JYF1 connectors.
Pinout details for 550-sheet tray option system card connectors J34, J35, JPTS1.
Pinout details for 2000-sheet high-capacity feeder option system card connectors J32, J34, J35, JPTS1.
List of 5-bin mailbox system card connectors and their connections.
Guide for identifying unsafe conditions and assessing hazards in the printer's environment.
Table listing expected part life for maintenance items like ADF, Fuser, ITU, and MPF components.
Information on the ADF maintenance kit (40X8806) and the issues it addresses.
Instructions for greasing posts and gears when installing motor drive assemblies for proper performance.
Explains how to use the parts catalog, including understanding Asm-index, Part number, and FRU information.
Exploded view and part list for flatbed scanner components, including CCD assembly and exposure lamp.
Exploded view and part list for ADF feed and drive components, including motors and gears.
Exploded view and part list for ADF electronics, including sensors, controller cards, and cables.
Exploded view and part list for the finisher/stacker assembly and its components.
Table identifying screws by P/N, screw type, location, and quantity.
Final table of screw identification, including location and quantity for various printer parts.
