Lexmark X792 - Scanner Cover Removals; AIO Rear Scanner Cover Removal

Repair information 4-211
7562
Go Back
Previous
Next
Scanner cover removals
AIO rear scanner cover removal
See “Front, right, and top covers” on page 7-3 for the part number.
1. Remove the rear upper cover. See “Rear upper cover removal” on page 4-25.
2. Remove the AIO option cover. See “AIO option cover removal” on page 4-4.
Note: If you have any output options installed, then the option cover is already removed. Remove the
output options and redrive unit instead.
3. Remove the screw (A) from the rear of the printer.
4. Pivot the AIO rear scanner cover forward, and then slide to remove it.
A (88A0322)
1
2