7-64 Service Manual
7562
Assembly 28: Miscellaneous
P/N
Units/
FRU
Description Removal procedure
40X7163 5 Sensors parts packet, including
•Waste toner sensors (2)
•Paper auto size sensor
•Paper path sensor (not shown)
•Bin-full sensor (not shown)
“Waste toner sensor removal” on
page 4-164
“Waste toner full sensor removal” on
page 4-168
“Paper auto-size sensor removal” on
page 4-115
“Staging deflector assembly removal”
on page 4-138
“Bin-full sensor removal” on page 4-34
40X7167 1 EP and cartridge cables parts packet,
including
•BLDC K & ITU cable
•BLDC Y & Fuser cable
•BLDC C & M cable
•M+K Cart Metering cable
•C+Y Cart Metering cable
For cable descriptions and locations, see
“Cable and thermistor location table”
on page 7-67.
40X7168 1 Cables parts packet, including
•Paper path
•MPF sensor
•Tray 1 machine side
•Duplex motor
•Staging motor
•Thermistor & redrive
•HVPS cable
•Option bottom
•Ground
•Duplex door beacon side
•Ref edge ground
•Blower & right side waste
•Duplexer
•Waste toner full
40X7170 1 Beacon cables parts packet, including
•Waste toner
•Bin-full & output beacon
•Front door beacon
40X7171 1 Thermistors parts packet, including
•Thermistor—weather station
compensator
•Fuser thermal guide assembly
40X7173 140 Screws and fasteners parts packet For screw descriptions and locations, see
“Screw and retainer identification
table” on page 7-71.
40X7175 24 Cable ties parts packet N/A
40X7176 5 Cable retainer parts packet N/A
40X7177 5 Cable retainer parts packet (holds
thermistor on LVPS)
N/A
40X7199 5 OP panel cables parts packet, including
• Front host USB cable
• Panel USB Hub - H cable
• AIO cavelight cable
• 24-pin UICC cable
• 30-pin UICC LCD cable
For cable descriptions and locations, see
“Cable and thermistor location table”
on page 7-67.
40X7221 1 AIO relocation N/A
To Next Page
Loading...
